When electrical work comes up in Allentown, what matters most is that the job is scoped correctly from the start. A city this size generates a wide range of electrical calls: apartment turnovers where every outlet and switch needs to be checked before a new tenant moves in, commercial build-outs where circuits have to be added without shutting down the rest of the floor, older rowhouses where the wiring has not been touched since the original installation. We handle all of it, every day from 5:30 AM to 10:00 PM.
The process is the same regardless of the job. You call, describe what is happening, and we scope the work on the phone. You get a price before anything is scheduled, and the visit covers what was agreed. We show up, and we keep you posted until the job is done.
When a property in Allentown changes hands, the electrical system is one of the first things a buyer's inspector looks at. Outlets are tested for grounding and polarity. The panel is opened and checked for double-tapped breakers, undersized wiring, and missing knockouts. GFCI and AFCI protection is verified in the locations code requires it. What the inspector finds goes into a written report, and what that report says can determine whether a sale closes on schedule or stalls while corrections are negotiated.
We handle pre-sale electrical inspections and the code-correction work that follows them. Bethlehem Electrical Company also works with landlords preparing units for new tenancies, where the same systematic check applies: every outlet, every switch, every protection device, and a panel that is in serviceable condition before a tenant takes possession. Getting the paperwork right before a transaction is under pressure is a different kind of job than a repair call, and we approach it that way.
Electrical work does not have a flat rate because no two jobs start from the same place. The price depends on what the fault actually turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A tripping breaker might be a failing breaker, an overloaded circuit, or a wiring fault somewhere along the run. Each one is a different scope and a different price.
When you call, we ask the questions that let us give you a number before anything is scheduled. That number reflects what the job involves based on what you describe. If something changes once we are on site, we explain it before the work continues. You are told what it covers and why.
The things that most commonly move a quote are the age and condition of the existing wiring, how accessible the panel and work areas are, and whether the job requires GFCI or AFCI protection to be added as part of bringing the work up to current standard. None of that is a surprise if it comes up, because we walk through it on the call.
Renovations and extensions create a specific kind of scheduling problem. The electrician has to rough in the wiring before the drywall goes up, and the inspection has to happen before the walls close. If the order is wrong, the drywall comes back down. That is not a hypothetical: it happens when trades are booked independently without coordinating the sequence.
We work with contractors, builders, and property owners on exactly this kind of project. The electrical rough-in needs to happen after framing and before insulation. Any panel work or service upgrade that the new circuits require needs to be confirmed before the rough-in starts, so the capacity is there when the circuits are energized. Getting us on the phone early in the project timeline is what keeps the sequence from becoming a problem.
For commercial build-outs in Allentown, the same principle applies at a larger scale. A tenant fit-out that adds lighting circuits, dedicated circuits for equipment, and a subpanel for a new area needs the electrical scope confirmed before the general contractor sets the schedule. We scope the electrical side on the call and can coordinate directly with whoever is running the project.
When a problem will not keep, we take short-notice work. Ask what the schedule allows when you call and we will tell you directly. We are available every day from 5:30 AM to 10:00 PM, and that includes weekends.
A rental unit with a tenant in place, a retail space that has to stay open, a multi-unit building where only part of the power can be cut at a time: these are scheduling situations we work around regularly. The scope and the timing are both confirmed on the call. We keep you informed from diagnosis to final test, which matters when other people's schedules are involved.
Connecting a generator to your home's wiring without a transfer switch is a safety problem, not just a code problem. The transfer switch isolates the home's circuits from the utility line before the generator feeds them. Without it, power can back-feed onto the line while utility workers are on it. We install manual and automatic transfer switches for portable and standby generators, wire the circuits the generator will supply, and test the transfer before the job closes.
A panel with half the breakers labeled "misc" or not labeled at all is a problem the moment you need to cut power to a specific circuit quickly. We trace each circuit back to its source, label the panel accurately, and document what is on each breaker. In older Allentown properties where circuits have been added over time without consistent documentation, this work often turns up wiring that was not done to standard and needs to be corrected.
Running every new circuit back to the main panel is not always practical, and it is often not the right answer for a detached garage or a finished basement workshop. A subpanel fed from the main panel lets you add circuits where they are needed without filling the main panel or running long wire runs back through the house. We assess the main panel's capacity, size the subpanel feed correctly, and wire the new circuits from there. Wiring work checked against code before sign-off is part of every subpanel installation.
Recessed lighting and LED retrofits are some of the most common lighting calls we get. Recessed cans in a kitchen or living room require the right fixture type for the ceiling construction, proper spacing, and a circuit that can carry the load. LED retrofits into existing housings are straightforward when the housing is compatible and more involved when it is not. We assess the existing fixtures, confirm the circuit capacity, and handle the wiring from the panel to the switch to the fixture. Exterior lighting follows the same process, with weatherproof fixtures and circuits rated for outdoor use.
Arc-fault and ground-fault breakers come up alongside lighting work regularly. Adding recessed lights to a bedroom circuit often means the circuit needs AFCI protection under current code, and we include that conversation in the scope rather than treating it as a separate job.
Most electrical work beyond a straight device replacement requires a permit. That covers panel upgrades, new circuits, rewiring, and any work that changes the capacity or configuration of the electrical system. The permit triggers an inspection, and the inspection is what closes the job out on record. For a property owner in Allentown, that record matters: it is what shows a future buyer, a lender, or an insurance carrier that the work was done to standard.
We handle the permit filing as part of the job. The timing matters because the inspection has to happen at the right stage, particularly for work inside walls. We confirm what is required for your specific job on the call and build the permit timeline into the schedule so it does not hold anything up. Electrical work done to the standard the next inspection expects is not a phrase we use loosely. It is what the permit and inspection process is there to confirm.
We cover Allentown and the surrounding Lehigh County communities, including Dorneyville, Fullerton, Salisbury Township, Cetronia, and South Whitehall Township. If you are in the area and not certain whether your address falls within our coverage, call and we will confirm it directly.
The work is the same across the area: repairs, panel upgrades, rewiring, new circuits, generator hookups, EV charger installation, and everything in between. The same daily hours apply throughout, 5:30 AM to 10:00 PM, every day of the week. You will find the rest of it on our list of electrical services.
The most common calls involve outlet and switch replacements during unit turnovers, GFCI and AFCI protection that needs to be added to bring older units up to current standard, panel work in buildings where the service has not been upgraded in decades, and dedicated circuits for appliances that were added after the original installation. Landlords and property managers also call us for pre-tenancy inspections when they want a documented check of the electrical system before a new lease starts.
Older properties in this area frequently have wiring that was installed under earlier standards, including knob-and-tube or aluminum branch wiring, panels that were never upgraded from their original capacity, and circuits that were added over the years without consistent documentation. That history means a job that looks straightforward from the outside sometimes opens up into a broader correction once the panel or a wall is accessed. We account for that possibility on the call and explain any change in scope before the work continues.
We leave you with a clear account of what was done, which circuits were affected, and any items that were noted during the job. If the work involved a permit and inspection, the documentation from that process is part of what you receive. Ask on the call if you need a specific format for insurance or sale purposes.
Yes. Landlords and property managers with multiple properties can call to discuss scheduling across locations. We handle the work on a per-property basis and can confirm what is available when you call to plan it out.
A new appliance with a higher draw may need a larger circuit than the one already in place. We check the existing wiring, the outlet type, and the breaker size against the new appliance's requirements before connecting anything. If the circuit needs to be upgraded, we handle that as part of the same job.
When something goes wrong with the wiring in your home or building, the fastest way to get it handled is a direct call. Describe what you are seeing, get a price on the phone, and pick a time. We are available every day from 5:30 AM to 10:00 PM.
Call (484) 916-4289 and we will scope the job from there.
Short-notice calls are something we take on regularly, so ask what the schedule allows when you call.
Also serving the towns around: Fullerton, Salisbury Township, South Whitehall Township.
Browse our complete coverage area.
Below is a plain-language breakdown of the electrical work we handle for homes and commercial properties in Allentown and the surrounding Lehigh Valley. Each row covers what the service involves, who it fits best, and one practical note worth knowing before you call. Read through what applies to your situation, then call us for a price on the specific job.
| Service | What It Covers | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Panel Upgrades | Load calculation and panel sizing, Panel replacement from meter down, Subpanel installation, Service entrance upgrade | Homes adding an EV charger, a large appliance, or a home addition that pushes the existing panel past its capacity | Panel work is inspected to code before sign-off. We size the new panel for current demand and leave capacity for what comes next. |
| Basement & Sump-Pump Circuits | Dedicated circuit for sump pump, Basement outlet and lighting circuits, GFCI protection in below-grade locations, Panel capacity confirmed before installation | Homeowners finishing a basement or adding a sump pump that needs its own reliable circuit | A sump pump on a shared circuit can lose power at the worst moment if the breaker trips. A dedicated circuit keeps it running independently of everything else in the basement. |
| Wiring & Circuit Installation | New circuit runs for any room, Garage and basement wiring, Attic and bathroom fan circuits, Electric water heater and workshop wiring | Homeowners finishing a basement, adding a garage circuit, or wiring a new space from scratch | Wiring work is checked against code before sign-off on every job, whether it is a single new circuit or a larger installation. |
Call (484) 916-4289 to describe what you are dealing with, get a price on the call, and pick a time that works. We are available every day from 5:30 AM to 10:00 PM.
(484) 916-4289