When something goes wrong with the wiring in your home, the first question is usually the same: how quickly can someone get out here, and what is it going to cost. We answer both on the phone, before anything is scheduled. We take calls every day from 5:30 AM to 10:00 PM, and we cover Upper Nazareth Township for everything from a dead outlet to a full panel replacement.
Upper Nazareth Township is a town where a lot of the housing stock carries its age in the walls. Older homes on original wiring, additions that were put in without documentation, panels that have not been touched in decades. That is the kind of work we see regularly here, and it is what we are set up to handle. Homeowners and landlords can call with the same expectation: a price on the phone, a time on the calendar, and the job done right.
A lot of people call for an inspection before a sale or a rental, and the question we hear most often is what they are actually going to get at the end of it. The answer is a clear account of what was found: panel condition, wiring type, grounding and bonding, GFCI and AFCI protection at the locations code requires, and the condition of outlets and fixtures throughout the property.
We test every outlet for correct wiring and grounding, check the panel for proper labeling and breaker condition, and verify that arc-fault and ground-fault protection is present where it belongs. Smoke and carbon monoxide detectors get checked as part of the same visit. Anything that is not functioning correctly gets noted, and we explain what it means before we leave.
A written record of the electrical system's condition is useful in ways that go beyond the inspection itself. A buyer's attorney, a home insurer, or a new tenant's property manager may ask what the wiring involves and when it was last looked at. Having a documented answer is worth more than a verbal one. We keep you informed from diagnosis to final test so you have something to hand over when the question comes up.
The price for any electrical job is confirmed on the phone before anything is scheduled. That is the process every time, whether the job is a single outlet replacement or a panel upgrade. You describe what you are seeing, we ask the questions needed to scope it, and you get a number before we set a time.
What moves a quote is straightforward. The fault itself matters: a loose connection at one outlet is a different scope from a wiring fault that runs back through several circuits. What has to be opened up to reach the problem matters too, because wiring inside finished walls takes more time than wiring in an open basement. And whether the existing panel can carry a new circuit or needs to be upgraded before the work can proceed is something we work out on the call, not after we arrive.
A price agreed before every visit. Clear scheduling every visit. Code-compliant every visit.
The jobs below come up constantly in a town with the kind of housing stock Upper Nazareth Township has. Each one starts with a situation, not a line item, and that is how we scope them.
A refrigerator, a washer, a dryer, or an electric range that shares a circuit with other loads is a setup that causes problems over time. Tripped breakers, shortened equipment life, and a panel that cannot keep up are the usual results. We run a dedicated circuit sized to the appliance, install the correct outlet, and confirm the panel has the capacity before the work starts. For heating and cooling units, we handle the electrical supply side: the dedicated circuit, the disconnect, and any panel work needed to carry the load.
A smart switch or a dimmer sounds like a small job until the existing wiring turns out to be two-wire with no neutral, which is common in older Upper Nazareth Township homes. Some smart switches require a neutral conductor to function, and some do not. We assess what is in the box before recommending a device, so the switch that gets installed actually works with what is already there. The wiring done properly, start to finish, is what keeps a simple upgrade from becoming a callback.
Outdoor lighting has to be wired to a circuit that can handle exposure, and the fixtures and outlets have to be rated for it. A motion sensor light over a garage, a post light at the end of a driveway, or landscape fixtures along a walkway all require weatherproof boxes, proper grounding, and a circuit that is not already carrying more than it should. We run the wiring, install the fixtures, and test everything before we leave.
An outlet that stopped working, a switch that buzzes when it is on, or a location where no outlet currently exists are all calls we take. GFCI outlets in kitchens, bathrooms, and exterior locations are required by code and are part of what we check during any visit. We'll handle the wiring so you don't have to.
Recessed LED fixtures, ceiling-mounted lights, under-cabinet lighting, and chandelier wiring all fall in this category. In older homes the junction boxes are sometimes not rated for the fixture being installed, which is a detail that matters and one we check before the new fixture goes up. Surge protection at the panel is worth considering alongside any lighting upgrade, since a voltage spike can damage LED drivers and smart controls that older incandescent fixtures would have shrugged off.
Getting your electrical problem handled starts with a quick call. When you call during our hours, 5:30 AM to 10:00 PM every day, you reach someone who can scope the job and confirm a time. Short-notice work is something we take on regularly. Ask what the schedule allows and we will tell you directly.
For landlords managing occupied units, we work around tenants. That means confirming the scope and the access plan before the visit, so the tenant knows what to expect and the job does not drag out. For a business that has to stay open during the work, we talk through which circuits need to come down and for how long, and we plan the visit around that. We show up, and we keep you posted until the job is done.
In a multi-unit building, the panel is not always where you expect it to find it. Some buildings have individual panels inside each unit. Others have a main distribution panel in a common area, with sub-panels or breakers feeding individual apartments. Knowing which setup you have is the first step in figuring out who is responsible for what.
When part of the electrical service is shared, work on the shared portion typically requires coordination with the building owner or manager, not just the tenant. We can assess what is inside the unit and explain clearly where the boundary is. Anything on the tenant's side of the meter is work we can scope and schedule. For the parts that sit on the building side, we will tell you who the right person to contact is.
That question comes up when the power is out or behaving strangely and the cause is not obvious. A partial outage that affects only some circuits in the house is usually a panel or wiring issue on the customer's side. A complete outage with no tripped breakers and no obvious fault at the panel may point to the service entrance or the utility line.
We start at the panel. If the breakers are intact, the service entrance connections look right, and the problem tracks back to something the utility feeds, we will tell you that directly. The utility is responsible for the line from the street to the meter, and a fault there is their repair to make. We help you understand what you are looking at and what the next call needs to be.
A failed main breaker, a loose service entrance connection inside the panel, or a fault on a branch circuit are all repairs that fall to us. Electrical work done to the standard the next inspection expects is what we aim for on every job, including the ones that start with a utility-versus-owner question.
We take calls from Upper Nazareth Township and the surrounding Northampton County communities every day from 5:30 AM to 10:00 PM. That includes weekends and most holidays. Neighboring towns we cover regularly include Nazareth, Lower Nazareth Township, Eastlawn Gardens, Bath, and Chapman. If you are in this part of Northampton County and not sure whether we cover your address, call and ask.
Coverage across the area means the same process regardless of which town you are in: a call, a scope, a price before anything is scheduled, and wiring checked against code before we close out the job. We'll take care of the circuits from here. More of the detail sits on the full electrical services list.
Older homes in this part of Northampton County frequently turn up knob-and-tube or aluminum branch wiring, panels that were never upgraded from 100-amp service, and outlets that lack GFCI protection in locations where it is now required. These are not emergencies in every case, but they do affect what the home can safely do and how an insurer or a buyer's inspector will view the property. A safety inspection is the clearest way to find out what is present and what, if anything, needs attention.
We are available every day from 5:30 AM to 10:00 PM, which covers early-morning and evening windows that work for many businesses. Call us to describe the job and the scheduling constraint, and we will confirm what is available.
When you call, we ask about access and who will be present during the visit. We work out the scope on the call so the tenant knows in advance which circuits will be off and for how long. The goal is a visit that does not disrupt the tenant more than the job requires, and we confirm the plan before anyone arrives.
You schedule it. We power it. Simple as that.
Call (484) 916-4289 to describe what you are seeing, get a price on the call, and pick a time.
We are available every day from 5:30 AM to 10:00 PM, and short-notice calls are something we handle. The sooner you call, the sooner we can get someone out.
We also take electrical work in: Lower Nazareth Township, Bushkill Township, Palmer Township.
The rest are on our complete coverage area.
Below is a plain-language breakdown of the electrical work we handle for homes and commercial properties in Upper Nazareth Township and the surrounding Lehigh Valley. Each row covers what the service involves, who it fits best, and one practical note worth knowing before you call. Read through what applies to your situation, then call us for a price on the specific job.
| Service | What It Covers | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Panel Upgrades | Load calculation and panel sizing, Panel replacement from meter down, Subpanel installation, Service entrance upgrade | Homes adding an EV charger, a large appliance, or a home addition that pushes the existing panel past its capacity | Panel work is inspected to code before sign-off. We size the new panel for current demand and leave capacity for what comes next. |
| Breaker & Fuse Repair | Breaker replacement, Fuse box assessment, Breaker that will not reset, Load check on affected circuit | Homes where a single breaker keeps tripping or a fuse box is still in service | A breaker that trips repeatedly under normal load is often signaling an overloaded circuit or a wiring fault, not just a bad breaker. We check both before replacing anything. |
| Whole-Home Surge Protection | Surge protector installed at the panel, Protection for all circuits in the building, Added during any panel or circuit job | Homeowners with sensitive electronics, home office equipment, or appliances they want protected from voltage spikes | A panel-level surge protector catches spikes before they reach individual outlets, protecting everything in the building at once rather than just what is plugged into a strip. |
Call (484) 916-4289 to describe what you are dealing with, get a price on the call, and pick a time that works. We are available every day from 5:30 AM to 10:00 PM.
(484) 916-4289